How do I install and set up an eSIM on my iOS device?

Please check the following items in order to guarantee that you are able to successfully install and set up your eSIM:

Below you can find the step-by-step instructions, but you may also find helpful our video guide

There are three ways of installing an eSIM on your device:

This article will guide you through both QR code and Manual methods.

I. PREPARATION

  1. Login to your Airalo account.
  2. Go to My eSIMs.
  3. Look for the eSIM you want to install.
  4. Tap the Details button.
  5. Tap Install eSIM/Access Data
  6. Tap the Manual tab at the top
  7. You should be able to see SM-DP + Address & Activation code. Take note of this or keep this page open so you can copy the details later.

II. INSTALLATION

MANUAL METHOD

  1. On your device, go to Settings
  2. Tap Cellular or Mobile.
  3. Tap Add Cellular Plan or Add Mobile Data Plan.

Add Data Plan

4. Select Enter Details Manually. You will be asked to enter:

    • SM-DP+ Address
    • Activation Code
    • Confirmation Code(if available on your Airalo Account)

5. Choose a label or customized label for your eSIM.

6. Under the Default Line page, select your eSIM for cellular data only

7. You should see your new eSIM under your Cellular Data or Mobile Data Plans.

QR CODE METHOD

  1. On your device, go to Settings
  2. Tap Cellular or Mobile
  3. Tap Add Cellular Plan or Add Mobile Data  Plan

Add Data Plan

4. Use your printed QR code or another device that displays the QR code to scan your eSIM QR Code

 

 

5. If prompted, enter the 4-digit confirmation code. You can skip this step if you are not provided with the confirmation code.

6. Choose a label or customized label for your eSIM.

7. Under the Default Line page, select your eSIM for cellular data only

8. You should see your new eSIM under your Cellular Data or Mobile Data Plans.

IV. ACCESSING DATA (QR CODE OR MANUAL METHOD)

After installing your eSIM, you must also make the necessary adjustments for connecting as required on your eSIM installation page.

  1. On your device, go to Settings>Cellular or Settings>Mobile.
  2. Tap on your newly installed eSIM plan.

3. Toggle TURN ON THIS LINE for your eSIM and enable the Data Roaming

4. On the same page, tap on CELLULAR DATA NETWORK OR MOBILE DATA NETWORK. Type the APN(access point name) on the field provided on your device if required. You can find the APN details in the eSIM installation details on your Airalo App/Account.

5. Go back to Settings>Cellular or Settings>Mobile.

6. Select your eSIM for Cellular Data or Mobile Data. Be sure to turn OFF Allow Cellular Data Switching” to avoid charges on your other line.

7. Go to your eSIM settings and select the supported network.

If you have any questions, please feel free to contact support.

Related questions

Other topics

Still need help?

Reach out to us and our customer support team will get back to you in a jiffy.
Send us a message
Copyright Airalo © 2024